High Quality Assurance - JINPAT Product Testing Centre

In the face of fierce market competition, no matter what type of products, quality is always the foundation of an enterprise. Quality first is the service principle that JINPAT Electronics has been adhering to for many years, and it is also the foundation for JINPAT slip rings to gain a good reputation in the market. Behind the high-quality slip ring is JINPAT Electronics' large-scale product testing center. JINPAT Product Testing Center is divided into two areas: slip ring life testing laboratory and product environmental adaptability laboratory, covering a total area of more than 1,000 square meters and containing more than 500 sets of various equipment.

In the slip ring life testing laboratory, newly developed slip rings and older products after material and structure optimization should be tested in the testing center to obtain the final accurate life data. The entire life testing cycle of some high-life conductive slip rings even exceeds one. Of course, for conventional products and mass-produced products, JINPAT's quality engineers will also conduct random inspections on a regular basis to ensure that the products customers receive are of the best quality. JINPAT slip ring life testing laboratory has a lot of equipment, which can support nearly 500 products to be tested at the same time, which is far ahead of other slip ring manufacturers in the industry. JINPAT uses the original method to test the life of the slip ring, because JINPAT Electronics found that there is no shortcut to improving product quality. Only after years of repeated tests can we design the most suitable structure and main materials.

Environmental testing is also a very important part of the slip ring development process, especially those products with high environmental requirements. Many JINPAT slip rings will be used in seawater, high temperature and high dust environment, so the environmental test is one of the environmental tests. Tests that must be performed before the slip ring leaves the factory. JINPAT Environmental Simulation Laboratory has a variety of testing equipment such as high and low temperature boxes, salt spray testing machines, shaking tables, etc. Taking high and low temperature boxes as an example, there are up to 15 sets of high and low temperature boxes with different specifications, which can complete high and low temperature impact tests between -100°C and +300°C. It is worth noting that some test equipment turntables use JINPAT's slip rings.